What the catalog says
Aug 2026CatalogKohinoor Of Veneer Duro Natures Signature
SeriesDYED
Materialnatural veneer
Finish on the plateBIRDS EYE MAPLE ICE GREY
Colours read off the plateNone on the plate
Thickness (mm) — less than 4.0mmSpecified Value: ±10%; Results: Complies
Thickness (mm) — Above 4.0mmSpecified Value: ±5%; Results: Complies
Moisture ContentSpecified Value: 5-15%; Results: 7.0-9.0
Water ResistanceSpecified Value: Shall not show delamination; Results: Complies
Length2150,2440 &3050 mm
Width915 & 1220 mm
Thickness4 mm & above
Veneer Face0.5mm minimum
Backing VariantsPlywood (Gurjan/MHW): 4 mm; MDF: 6.0-25.0 mm; Flex Backing: 0.5 mm
Product DensityPlywood (Gurjan/MHW): 620; MDF: 680; Kraft: 1250; Flex Backing: 550 Kgs/cubic meters/typical values
Surface TextureNatural; Open Grained; Distressed
Range AvailableDyed; Natural; Burls; Metallo; Fumed; Mystic; Designer
Suggested Finishing - Natural/FumedPU, Polyester and Water Based Acrylic
Suggested Finishing - DyedWater Based Acrylic or PU with Non Yellowing component
Cuts AvailableCrown Cut; Quarter Cut; Rift Cut; Rotary Cut
Veneer MatchingBook Matching; Shuffle Matching; Slip Matching; Reverse Slip Matching
Borer & Termite ResistanceProduct exhibit is defined resistance
Bonding AdhesiveIn-house Formulation
EmissionsEN 717-1
Bonding strength of adhesiveANSI
Resistance to colour changeChange owing to nature of wood are observed over a period of time and exposure to light
Abrasion CyclesASTM 4060 S32; 1000 CYCLES