What the catalog says
Aug 2026CatalogKohinoor Of Veneer Duro Natures Signature
SeriesELITE
Materialnatural veneer
Finish on the plateLARCH (CROWN/ QUARTER)
Colours read off the plateNone on the plate
Thickness (mm) — less than 4.0mmSpecified Value: ±10%; Results: Complies
Thickness (mm) — Above 4.0mmSpecified Value: ±5%; Results: Complies
Moisture ContentSpecified Value: 5-15%; Results: 7.0-9.0
Water ResistanceSpecified Value: Shall not show delamination; Results: Complies
Length2150,2440 &3050 mm
Width915 & 1220 mm
Thickness4 mm & above
Veneer Face0.5mm minimum
Backing VariantsPlywood (Gurjan/MHW): 4 mm; MDF: 6.0-25.0 mm; Flex Backing: 0.5 mm
Product DensityPlywood (Gurjan/MHW): 620; MDF: 680; Kraft: 1250; Flex Backing: 550 Kgs/cubic meters/typical values
Surface TextureNatural; Open Grained; Distressed
Range AvailableDyed; Natural; Burls; Metallo; Fumed; Mystic; Designer
Suggested Finishing - Natural/FumedPU, Polyester and Water Based Acrylic
Suggested Finishing - DyedWater Based Acrylic or PU with Non Yellowing component
Cuts AvailableCrown Cut; Quarter Cut; Rift Cut; Rotary Cut
Veneer MatchingBook Matching; Shuffle Matching; Slip Matching; Reverse Slip Matching
Borer & Termite ResistanceProduct exhibit is defined resistance
Bonding AdhesiveIn-house Formulation
EmissionsEN 717-1
Bonding strength of adhesiveANSI
Resistance to colour changeChange owing to nature of wood are observed over a period of time and exposure to light
Abrasion CyclesASTM 4060 S32; 1000 CYCLES